Investigation on a mobile fire extinguishing approach using liquid carbon dioxide as inert medium for underground mine.

Injecting carbon dioxide is the most effective means of preventing and extinguishing fires in sealing hazardous areas, but the traditional method slowly and remotely injects carbon dioxide gas into the well after gasification on the ground, which is dependent on the complete mine pipe network without cooling effect. To inject liquid directly from the tank with vacuum interlayer and heat insulating powder for rapid inerting and cooling, a new approach using track mobile platform to go deep into the underground mine disaster area is proposed, so the liquid can be delivered to the nozzle at the end of DN40 large diameter pipe, and the continuous gasification jet can be realized. The experimental results show that: (1) The liquid volume in a tank of vacuum degree within 2.0 Pa and 200 mm interlayer reduced no more than 15.5% after 48 days; (2) Taking the pressure in the tank as the power source, because of environmental differences inside and outside the pipe after 100 m pressure holding delivery, the physical form of liquid and gas could be converted instantly; (3) The continuous discharge time without ice blocking for a tank full of 2 m3 liquid was about 10.5 min under 25 L dual mode nitrogen pressurization, which is 1/12 of injection time after ground gasification; (4) Based on the temperature decrease trend measured at different positions, the cooling characteristics on liquid gasification jet path are quantified, and the calculation formula of temperature changing with time on the center line of liquid gasification jet is obtained. Through this new approach, the integration of vacuum insulated storage, safe mobile transportation, and continuous and rapid release with large flow can be achieved for the liquid carbon dioxide.

Optimal Rotation Age in Fast Growing Plantations: A Dynamical Optimization Problem.

Forest plantations are economically and environmentally relevant, as they play a key role in timber production and carbon capture. It is expected that the future climate change scenario affects forest growth and modify the rotation age for timber production. However, mathematical models on the effect of climate change on the rotation age for timber production remain still limited. We aim to determine the optimal rotation age that maximizes the net economic benefit of timber volume in a negative scenario from the climatic point of view. For this purpose, a bioeconomic optimal control problem was formulated from a system of Ordinary Differential Equations (ODEs) governed by the state variables live biomass volume, intrinsic growth rate, and area affected by fire. Then, four control variables were associated to the system, representing forest management activities, which are felling, thinning, reforestation, and fire prevention. The existence of optimal control solutions was demonstrated, and the solutions of the optimal control problem were also characterized using Pontryagin's Maximum Principle. The solutions of the model were approximated numerically by the Forward-Backward Sweep method. To validate the model, two scenarios were considered: a realistic scenario that represents current forestry activities for the exotic species Pinus radiata D. Don, and a pessimistic scenario, which considers environmental conditions conducive to a higher occurrence of forest fires. The optimal solution that maximizes the net benefit of timber volume consists of a strategy that considers all four control variables simultaneously. For felling and thinning, regardless of the scenario considered, the optimal strategy is to spend on both activities depending on the amount of biomass in the field. Similarly, for reforestation, the optimal strategy is to spend as the forest is harvested. In the case of fire prevention, in the realistic scenario, the optimal strategy consists of reducing the expenses in fire prevention because the incidence of fires is lower, whereas in the pessimistic scenario, the opposite is true. It is concluded that the optimal rotation age that maximizes the net economic benefit of timber volume in P. radiata plantations is 24 and 19 years for the realistic and pessimistic scenarios, respectively. This corroborates that the presence of fires influences the determination of the optimal rotation age, and as a consequence, the net economic benefit.

Forest fire risk zoning based on fuzzy logic and analytical network process.

Forest fires have a significant impact on human life, property safety, and ecological environment. Deve-loping high-quality forest fire risk maps is beneficial for preventing forest fires, guiding resource allocation for firefighting, assisting in fire suppression efforts, and supporting decision-making. With a multi-criteria decision analysis (MCDA) method based on geographic information systems (GIS) and literature review, we assessed the main factors influencing the occurrences of forest fires in Youxi County, Fujian Province. We analyzed the importance of each fire risk factor using the analytic network process (ANP) and assigned weights, and evaluated the sub-standard weights using fuzzy logic assessment. Using ArcGIS aggregation functions, we generated a forest fire risk map and validated it with satellite fire points. The results showed that the areas classified as level 4 or higher fire risk accounted for a considerable proportion in Youxi County, and that the central and northern regions were at higher risk. The overall fire risk situation in the county was severe. The fuzzy ANP model demonstrated a high accuracy of 85.8%. The introduction of this novel MCDA method could effectively improve the accuracy of forest fire risk mapping at a small scale, providing a basis for early fire warning and the planning and allocation of firefighting resources.

A scoping review of wildfire smoke risk communications: issues, gaps, and recommendations.

BACKGROUND: Wildfire smoke exposure has become a growing public health concern, as megafires and fires at the wildland urban interface increase in incidence and severity. Smoke contains many pollutants that negatively impact health and is linked to a number of health complications and chronic diseases. Communicating effectively with the public, especially at-risk populations, to reduce their exposure to this environmental pollutant has become a public health priority. Although wildfire smoke risk communication research has also increased in the past decade, best practice guidance is limited, and most health communications do not adhere to health literacy principles: readability, accessibility, and actionability. This scoping review identifies peer-reviewed studies about wildfire smoke risk communications to identify gaps in research and evaluation of communications and programs that seek to educate the public. METHODS: Four hundred fifty-one articles were identified from Web of Science and PubMed databases. After screening, 21 articles were included in the final sample for the abstraction process and qualitative thematic analysis. Ten articles were based in the US, with the other half in Australia, Canada, Italy, and other countries. Fifteen articles examined communication materials and messaging recommendations. Eight papers described communication delivery strategies. Eleven articles discussed behavior change. Six articles touched on risk communications for vulnerable populations; findings were limited and called for increasing awareness and prioritizing risk communications for at-risk populations. RESULTS: This scoping review found limited studies describing behavior change to reduce wildfire smoke exposure, characteristics of effective communication materials and messaging, and communication delivery strategies. Literature on risk communications, dissemination, and behavior change for vulnerable populations was even more limited. CONCLUSIONS: Recommendations include providing risk communications that are easy-to-understand and adapted to specific needs of at-risk groups. Communications should provide a limited number of messages that include specific actions for avoiding smoke exposure. Effective communications should use mixed media formats and a wide variety of dissemination strategies. There is a pressing need for more intervention research and effectiveness evaluation of risk communications about wildfire smoke exposure, and more development and dissemination of risk communications for both the general public and vulnerable populations.

Surgical Fires Involving Alcohol-Based Preparation Solution, 1991-2020.

BACKGROUND: Alcohol-based skin preparations were first approved for surgical use in 1998 and have since become standard in most surgical fields. The purpose of this report is to examine incidence of surgical fires because of alcohol-based skin preparation and to understand how approval and regulation of alcohol-based skin preparations impacted trends in fires over time. METHODS: We identified all reported surgical fires resulting in patient or staff harm from 1991 through 2020 reported to the Food and Drug Administration's Manufacturer and User Facility Device Experience (MAUDE) database. We examined incidence of fires because of these preparations, trends after approval and regulation, and common causes. RESULTS: We identified 674 reports of surgical fires resulting in harm to patients and surgical personnel, in which 84 involved an alcohol-based preparation. The time-adjusted model shows that from 1996 through 2006, there was a 26.4% increase in fires followed by a 9.7% decrease from 2007 to 2020. The decrease in fires was most rapid for head and neck and upper aerodigestive tract surgeries. Qualitative content analysis revealed improper surgical site preparation as well as close proximity of surgical sites to an oxygen source as the most common causes of fires. CONCLUSION: Since FDA approval, alcohol-based preparation solutions have been associated with a significant percentage of surgical fires. Warning label updates from 2006 to 2012 coupled with increased awareness efforts of associated risks of alcohol-based surgical solutions likely contributed to the decrease in fires. Improper surgical site preparation technique and close proximity of surgical sites to oxygen continue to be risk factors for fires. LEVEL OF EVIDENCE: 4 Laryngoscope, 134:607-613, 2024.

Optimizing the implementation of a forest fuel break network.

Methods and models to design, prioritize and evaluate fuel break networks have potential application in many fire-prone ecosystems where major increases in fuel management investments are planned in response to growing incidence of wildfires. A key question facing managers is how to scale treatments into manageable project areas that meet operational and administrative constraints, and then prioritize their implementation over time to maximize fire management outcomes. We developed and tested a spatial modeling system to optimize the implementation of a proposed 3,538 km fuel break network and explore tradeoffs between two implementation strategies on a 0.5 million ha national forest in the western US. We segmented the network into 2,766 treatment units and used a spatial optimization model to compare linear versus radial project implementation geometries. We hypothesized that linear projects were more efficient at intercepting individual fire events over larger spatial domains, whereas radial projects conferred a higher level of network redundancy in terms of the length of the fuel break exposed to fires. We simulated implementation of the alternative project geometries and then examined fuel break-wildfire spatial interactions using a library of simulated fires developed in prior work. The results supported the hypothesis, with linear projects exhibiting substantially greater efficiency in terms of intercepting fires over larger areas, whereas radial projects had a higher interception length given a fire encountered a project. Adding economic objectives made it more difficult to obtain alternative project geometries, but substantially increased net revenue from harvested trees. We discuss how the model and results can be used to further understand decision tradeoffs and optimize the implementation of planned fuel break networks in conjunction with landscape conservation, protection, and restoration management in fire prone regions.

Safety breach analysis with subsequent proposal in the framework of fire protection.

Crisis management and population protection are among the primary activities of the state solutions. Therefore, it is essential to focus on these parts and address them preventively and repressively. This article describes (based on the actual event) the process of fire elimination and the solution of crisis management with activities related to population protection. This article deals with the analysis of safety breaches with a subsequent proposal in the context of fire protection. The result of this article is aimed at the proposal of preventive and repressive measures in the field of enterprise fire protection and population protection.

Investigation on preventive inerting approach of coal spontaneous combustion in gob considering adsorption effect.

Coal spontaneous combustion in the gob poses a significant threat to coal mining operations. Designing optimal process parameters for nitrogen injection to prevent and control fires efficiently is crucial. To achieve this, a multi-field coupling equation was established, considering the adsorption of coal to gas. The model's accuracy was verified on-site, and the effects of nitrogen injection at different locations and flow rates were simulated. The optimal injection parameters were determined by analyzing temperature and inerting time. The results showed that the coal spontaneous combustion hazardous zone in the gob tested on-site was consistent with the simulation from the perspective of physisorption. Nitrogen injection had three stages: gas expansion, rapid oxygen dilution, and complete inerting. The nitrogen injection effect presented a nonlinear change in injection location and flow rate. The optimal nitrogen injection location for the Tingnan Coal Mine in Shaanxi was determined to be 90 m behind the working face on the inlet side, with an optimal flow rate of 800 m3/min. This study focused on gas adsorption and offered valuable insights for creating high-efficiency fire-fighting techniques that involve inserting in the gob.

Remote monitoring, personnel extinguishment or helicopter extinguishment? How to control forest fires more effectively.

Forest fires have a great impact on the ecological environment. The government needs to take measures to control forest fires. Forest fires are easily affected by wind speed and other weather conditions, and the difficulty of extinguishing forest fires is easily affected by terrain complexity. Effective management methods can protect the important ecological functions of forests, thereby maintaining long-term development and economic efficiency. The government can put out the fire by remote monitoring, personnel extinguishing and helicopter extinguishing. Different from most articles on how to eliminate forest fires from the technical point of view, this article mainly analyzes from the two aspects of optimizing resource allocation and guiding policy formulation. This article constructs the differential game model under these three modes, and then obtains the equilibrium result. And the comparative analysis. Finally, the conclusion is drawn. The stronger the wind, the more residents need to flee. However, strong winds are not conducive to crews and helicopters fighting the fire. Rather than fighting fires, residents are more inclined to detect forest fires in time through remote monitoring. When the personnel can effectively control the fire, the personnel fire extinguishing mode is preferentially selected. Otherwise, helicopter firefighting mode should be selected.

Long-distance migration law of radon in overburden of abandoned goaf during coal spontaneous combustion.

The surface isotope radon measurement method (SIRMM) is widely used in fire source detection in abandoned mines. However, studies on the long-distance migration of radon during coal spontaneous combustion are lacking, which hinders the further popularization of this technology in coal fire prevention and control. For this reason, the migration law of radon in overlying strata in fire areas was studied through experiments and numerical simulation. The radon exhalation concentration of coal was found to increase at first and then decrease in the range of 30-350 °C through experiments. The radon concentration reaches the maximum value (557.1 Bq/m3) at 150 °C, which is 6.3 times higher than that at 30 °C. Based on the radon source term obtained by fitting the experimental data, the radon migration model of coal spontaneous combustion in abandoned goaf was constructed, and the dynamic distribution characteristics of the airflow, temperature, and radon concentration fields in the overlying strata area were analyzed. The internal relationship between surface radon and underground fire source was discussed. The simulation results revealed the sharp change in the porosity of the overlying rock causes radon concentration at the interface between the caving and fissure zones to increase continually with the process of spontaneous combustion, providing material and energy support for the long-distance radon migration. When the maximum temperature of the coal pile reaches 70 °C, the concentration of radon released from the coal pile increases rapidly to 13696 Bq/m3, and the radon from the underground space appears on the surface at this temperature. In the range of 70-150 °C, with rapid increase in radon released from coal piles, the surface concentration of radon also increased rapidly to 225 Bq/m3. At the high-temperature stage exceeding 150 °C, the concentration of radon released from coal piles exhibited a downward trend, resulting in a decrease in the rate of increase of radon concentration on the surface. A close relationship between the surface radon concentration and underground fire source temperature in the process of coal spontaneous combustion was observed. In the spatial position, the peak position of radon on the surface was highly consistent with that of the fire source longitudinally, which ensures the accuracy of the SIRMM to determine the location of the hidden fire source. This suggests that the SIRMM can accurately evaluate the fire source's temperature and fire area's development trend.

Evaluating Firefighter On-Scene Decontamination Practices Using a National Fire Records Management System.

OBJECTIVE: This study describes firefighters' on-scene decontamination procedure use post-working fire and frequency of adherence to best practice. METHODS: This retrospective analysis of working fires was conducted using records from the ESO Data Collaborative (Austin, TX) national research database from January 1, 2021, to December 31, 2021. Documentation of decontamination procedures was examined among records with smoke or combustion products exposure. Firefighter and incident characteristics were evaluated. Descriptive statistics and univariable odds ratios were calculated. RESULTS: Among the 31,281 firefighters included in the study, 8.0% documented a fire-related exposure. Of those, 82% performed at least one on-scene decontamination procedure; 5% documented all decontamination procedures defined as best practices. The odds of documenting any decontamination procedure were significantly decreased among firefighters responding to incidents in rural areas compared with urban areas (odds ratio, 0.70). CONCLUSIONS: Fire personnel may not be taking all necessary decontamination steps post-working fires.

Costs of preventing and supressing wildfires in Victoria, Australia.

Land managers around the world are increasingly under pressure to demonstrate that the actions being used to moderate wildfire risk are effective and cost-efficient. However, little research to date has focused on determining cost-efficiency of management actions or identified the factors which increase the costs of performing such actions. Here, we aimed to identify the key drivers of cost for fuel management (prescribed burning, mulching, and slashing), fuel breaks, and suppression using data from the state of Victoria, Australia. We utilise generalised additive models to understand how environmental factors, terrain, location, and management decisions influence the cost of implementing wildfire management efforts. These models show that cost per unit declines as the area treated or the area of the fire increases for all four management approaches. Therefore, preventative, and responsive management actions represent economies of scale that reduce in cost with larger treatments. We also found that there were regional differences in the cost of fuel management and fuel breaks, potentially related to the structure of resourcing treatments in each region and the availability of land on which it is feasible to implement management. Cost of suppression per fire increased with the number of fire fighters and when there were more fires occurring concurrently in the landscape. Identifying the key drivers of cost for preventative and responsive management actions could enable managers to allocate resources to these actions more efficiently in future. Understanding drivers of cost-efficiency could be critical for adapting management to shifts in wildfire risk, particularly given climate change will alter the window in which it is safe to apply some preventative fuel management actions and reduce suppression effectiveness.

Community Fire Risk Reduction: Longitudinal Assessment for HomeSafe Fire Prevention Program in Canada.

(1) Background: Residential fires represent the third leading cause of unintentional injuries globally. This study aims to offer an overview and a longitudinal evaluation of the HomeSafe program implemented in Surrey in 2008 and to assess its effectiveness in mitigating fire-related outcomes. (2) Methods: Data were collected over a 12-year period (2008-2019). Assessed outcomes comprised frequency of fire incidents, residential fires, casualties, functioning smoke alarms, and contained fires. The effectiveness of each initiative was determined by comparing the specific intervention group outcome and the city-wide outcome to the pre-intervention period. (3) Results: This study targeted 120,349 households. HomeSafe achieved overwhelming success in decreasing fire rates (-80%), increasing functioning smoke alarms (+60%), increasing the percentage of contained fires (+94%), and decreasing fire casualties (-40%). The study findings confirm that the three most effective HomeSafe initiatives were firefighters' visits of households, inspections and installations of smoke alarms, and verifications of fire crew alarms at fire incidents. Some initiatives were less successful, including post-door hangers (+12%) and package distribution (+15%). (4) Conclusions: The HomeSafe program effectively decreased the occurrence and magnitude of residential fires. Lessons learned should be transferred to similar contexts to implement an evidence-based, consistent, and systematic approach to sustainable fire prevention initiatives.

Advancements in Forest Fire Prevention: A Comprehensive Survey.

Nowadays, the challenges related to technological and environmental development are becoming increasingly complex. Among the environmentally significant issues, wildfires pose a serious threat to the global ecosystem. The damages inflicted upon forests are manifold, leading not only to the destruction of terrestrial ecosystems but also to climate changes. Consequently, reducing their impact on both people and nature requires the adoption of effective approaches for prevention, early warning, and well-coordinated interventions. This document presents an analysis of the evolution of various technologies used in the detection, monitoring, and prevention of forest fires from past years to the present. It highlights the strengths, limitations, and future developments in this field. Forest fires have emerged as a critical environmental concern due to their devastating effects on ecosystems and the potential repercussions on the climate. Understanding the evolution of technology in addressing this issue is essential to formulate more effective strategies for mitigating and preventing wildfires.

Research on the fire extinguishing performance of new gel foam for preventing and controlling the spontaneous combustion of coal gangue.

Coal gangue, as an associated product of coal mining, can cause a large number of piles to undergo slow oxidation and spontaneous combustion, resulting in the production of toxic and harmful gases, leading to casualties, environmental damage, and economic losses. Gel foam has been extensively employed as a fire-retardant material in coal mine fire prevention. The thermal stability and rheological properties of the newly developed gel foam were investigated in this study, as well as its oxygen barrier properties and fire extinguishing effect which were evaluated through programmed temperature rise and field fire extinguishing experiments. The experiment indicated that the temperature endurance of the new gel foam was around twice that of the ordinary gel foam, and this resistance decreased with the increment of foaming times. Moreover, the temperature endurance of the new gel foam with a stabilizer concentration of 0.5% was superior to that of 0.7% and 0.3%. Temperature has a negative effect on the rheological properties of the new gel foam, while the foam stabilizer concentration has a positive effect. The oxygen barrier performance experiment results showed that the CO release rate of coal samples treated with the new gel foam rose relatively slowly with temperature, and the CO concentration of coal samples treated with the new gel foam was only 159 ppm at 100 °C, which was significantly lower than 361.1 ppm after two-phase foam treatment and 715 ppm after water treatment. Through simulating the spontaneous combustion experiment of coal gangue, it was demonstrated that the new gel foam has a much better extinguishing effect than water and traditional two-phase foam. The new gel foam cools gradually and does not re-ignite during the fire extinguishing process, while the other two materials re-ignite after being extinguished.

Airway fires in otolaryngologic surgery: A database review.

PURPOSE: An estimated 34 % of reported operating room fires involve the airway. Despite the inherent risks in otolaryngologic surgery, education regarding prevention and management of airway fires is limited in graduate medical training. One contributing factor is a lack of reporting of such rare events in our literature. METHODS: The U.S. Food and Drug Administration's Manufacturer and User Facility Device Experience database was queried for reports of adverse events related to fires occurring during surgical procedures of the airway from January 1, 2010, to March 31, 2020. RESULTS: 3687 reports were identified and 49 unique reports of airway fire were included. Sustained fires were described in 16 (32.7 %) reports and 33 (67.3 %) described transient flares. 2 fires extended beyond the airway and 9 (18.4 %) were noted to have occurred at the start of the case. Fires were reported most commonly during tonsillectomy (n = 22 [44.9 %]), vocal fold excision (n = 5 [10.2 %]), and adenoidectomy (n = 4 [8.2 %]). 46 reports attributed flare initiation to a specific element of the fire triangle. 16 patient and 2 operator injuries were reported. Saline washing was utilized in 7 (14.3 %) cases overall. Patients were extubated immediately in 2 (12.5 %) of the 16 reports of sustained fires. 0 mortalities were reported. CONCLUSION: Airway fires were reported in a variety of upper airway procedures performed regularly by otolaryngologists. The triggering factor that led to fire was identified as a spark or char in about half of the reported cases, and only 2 reports described immediate removal of the endotracheal tube.